Yopingasa Machining Center mndandanda
Technical parameter
| Technical parameter | Chigawo | SXH-TH500 | Chithunzi cha SXH-TH630 | Chithunzi cha SXH-XW1814 | Chithunzi cha SXH-TH1311 |
| Kukula kogwira ntchito (L*W) | mm | 500 * 500 | 630 * 630 | 800*800 | 1000 * 1000 |
| Nambala yogwira ntchito | Chidutswa | 1 kapena 2 | 1 kapena 2 | 1 | 1 |
| Worktable indexing | ° | 0.001/1 | 0.001/1 | 0.001/1 | 0.001/1 |
| T-slot(N*W*D) | mm | 5-18 * 100 | 5-18 * 100 | 5-22 * 160 | 5-18 * 100 |
| Max.worktable katundu | kg | 600/500*2 | 900/800*2 | 1600 | 3500 |
| Maulendo oyenda kumanzere ndi kumanja (X-axis) | mm | 800 | 1100 | 1800 | 1300 |
| Maulendo oyenda kutsogolo ndi kumbuyo (Z-axis) | mm | 800 | 1100 | 900 | 1300 |
| Spindle box up and down travel (Y-axis) | mm | 800 | 800 | 1400 | 1100 |
| Mtunda wochokera pakati pa spindle mpaka pamwamba pa worktable | mm | 125-925 | 125-1225 | 82-1318 | 50-1150 |
| Mtunda kuchokera kumapeto a spindle kupita ku malo ogwirira ntchito | mm | 50-850 | 50-850 | 200-1100 | 250-1150 |
| Spindle taper | Mtengo wa BT50 | Mtengo wa BT50 | Mtengo wa BT50 | Mtengo wa BT50 | |
| Kuthamanga kwa Max.spindle | rpm pa | 6000 | 600 | 6000 | 6000 |
| Kuthamanga mwachangu (X/Y/Z) | m/mphindi | 24/24/24 | 30/30/30 | 16/16/16 | 24/24/24 |
| Mtundu wa njanji / makina opangira | m/mphindi | 3 njanji yozungulira | 3 njanji yozungulira | 3-njanji yolimba | 3 njanji yozungulira |
| Standard T | Standard T | Cross slide | |||
| Chida magazini mphamvu | chidutswa | 24 | 24 | 24 | 24 |
| Max.chida kulemera | kg | 25 | 25 | 25 | 25 |
| Kusintha nthawi ya chida (chida kukhala chida) | s | 5.5 | 5.5 | 5.5 | 5.5 |
| Kuyika kulondola | mm | ± 0.005/300 | ± 0.005/300 | ± 0.005/300 | ± 0.005/300 |
| Kubwerezabwereza kulondola | mm | ± 0.003/300 | ± 0.003/300 | ± 0.003/300 | ± 0.003/300 |
| Kulemera kwa makina | T | 9/9.5 | 10.5/11 | 18 | 14.5 |
| Kukula kwa makina akunja (L*W*H) | mm | 5300*3300*3570 | 5900*3500*3570 | 4900*3500*3600 | 4500*6400*3600 |
Lembani uthenga wanu apa ndikutumiza kwa ife
