Asanu-olamulira Machining Center Series
Technical parameter
| Technical parameter | Chigawo | SXH-U500 | SXH-U650 |
| Ulendo wa X/Y/Z wofanana | mm | 500/450/450 | 800/520/460 |
| B amapendekeka gudumu lozungulira | ° | ﹢120~﹣110 | ﹢120~﹣120 |
| Mtundu wozungulira wa C-axis | ° | 360 | 360 |
| Mphuno ya spindle kuti igwire ntchito pamwamba | mm | 150-600 | 200-660 |
Spindle
| Fomu ya Spindle drive | Mtundu womangidwa | Mtundu wolumikizidwa mwachindunji | |
| Fomu yogwirira ntchito | Chithunzi cha HSK-A630 | Chithunzi cha HSK-A63 | |
| Liwiro la spindle | rpm pa | 24000 | 24000 |
ATC system
| Chida magazini mphamvu | T | 32 | 32 |
| Mafotokozedwe a zida | Chithunzi cha HSK-A63 | Chithunzi cha HSK-A63 | |
| Utali wa Max.chida | mm | 250 | 250 |
| Max.tool diameter(chida choyandikana chilibe kanthu) | mm | ∅76(∅125) | ∅76(∅125) |
Mphamvu zamagalimoto
| Spindle motor (yopitilira / 30 min) | Kw | 25 | 30 |
| X/Y/Z axis motor motor | Kw | 2.3/2.3/3.3 | 4.3/5.2/4.3 |
| B / C axis motor | Kw | 17/11.4 | 17/11.4 |
B/C axis
| Kukula kwa tebulo la axis asanu | mm | ∅500 | ∅650 |
| Kukula kwa dzenje lapakati | mm | ∅50H7*10 kuya | ∅50H7*10 kuya |
| T-slot(N*D*S) | mm | 7-63*14 | 5-100*18 |
| Max.workpiece volumn | mm | ∅600 | ∅600 |
| Max.worktable katundu | kg | 300 | 300 |
Kuthamanga kwachangu
| Kuthamanga kwachangu kwa X/Y/Z | m/mphindi | 48/48/48 | 24/24/24 |
| B/C olamulira akuthamanga mofulumira | rpm pa | 50/120 | 50/120 |
| Kudula liwiro la chakudya | mm/mphindi | 1-20000 | 1-8000 |
Kulondola
| Kuyika kulondola | m/mphindi | ± 0.005/300 | ± 0.005/300 |
| Kubwerezabwereza kulondola | rpm pa | ± 0.003/300 | ± 0.003/300 |
Kulamulira
| Dongosolo lowongolera | SIEMENS840D | SIEMENS840DOthers |
Ena
| Kulemera konse kwa makina | kg | 6500 | 9200 |
| Kuchuluka kwa tanki yamadzi | L | 200 | 300 |
| Kukula kwa mawonekedwe (L*W*H) | mm | 2200*2800*2600 | 3000*2900*2700 |
| Kusintha kwakukulu | KVA | 25 | 25 |
| Gwero la mpweya | kg/cm² | ≥6 | ≥6 |
Lembani uthenga wanu apa ndikutumiza kwa ife
